Enerseal® Spring Energized Seals

spring energized seals

Description


a series of lip seals with jacket in Neuflon-ptfe compound and UHMWPE expanded by a spring
either in AISI 301 302, Elgiloy, Hastelloy, Inconel X750 Nace.
Spring Energized seals satisfy the most rigorous demands for Oil & Gas, chemical, pharmaceutical, food processing and cryogenics applications.

Optional filling with EU - FDA approved White Silicone.

Ample chemical resistance range Long term maintenance of the pre load

Uncontaminating and sterilizable, Minimum frictional coefficient No adhesion to the counter-surface No ageing

Products

Profile Spring Energized Seals Enerseal®
Description and Code		 Pressure
Bar		 Speed
m/s		 Temp. °C
spring energized seals Axial sealing
Piston: code 022
Rod:     cod 021
reinforced dynamic lip		 250 5m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 29P
Rod :    code 29C		 250 5m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 100
Rod :    code 099
Sharp lips
Abrasive fluids		 250 5m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 65P
Rod :    code 65C
Rounded lips		 250 5m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 085
Rod :    code 084
Scraper lip		 250 5m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 101
Rod :    code 102
Reinforced dynamic lip
PEEK Backup		 700 5m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 103
Rod :    code 104
Reinforced dynamic lip
PEEK Backup		 700 5m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code  34
Rod :    code 112
high pre-load, low temperature		 250 3m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 086
Rod :    code 087
Scraper lip, high pre-load, low temperature		 250 3m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 106
Rod :    code 107
PEEK Backup
High pre-load, low temperature		 700 3m/sec Axial -200° +260°
spring energized seals Axial sealing
Piston: code 108
Rod :    code 109
PEEK Backup
High pre-load, low temperature		 700 3m/sec Axial -200° +260°
spring energized seals Static Face sealing
Internal Pressure code 023
External Pressure code 024		 250 Static -200° +260°
spring energized seals Static Face sealing
Internal Pressure code 064
External Pressure code 066		 250 Static -200° +260°
spring energized seals Statice Face sealing
Internal Pressure code 35
External Pressure code 36
high pre-load, low temperature		 250 Staticl -200° +260°
rotary shaft energized seal

Rotary seal code 055
cantilever V spring
Chamfered sealing lip

 50 1.5m/sec Rotational -200° +260°
rotary shaft energized seal Rotary seal code 054
cantilever V spring
Rounded sealing lip		 50 1.5m/sec Rotational -200° +260°
rotary shaft energized seal Rotary seal code 080
cantilever V spring
Sharp sealing lip
Abrasive fluids		 50 1.5m/sec Rotational -200° +260°
rotary shaft energized seal Rotary seal code 081
cantilever V spring
Rounded sealing lips		 50 1.5m/sec Rotational -200° +260°
rotary shaft energized seal Rotary seal code 118
cantilever U spring		 50 1.5m/sec Rotational -200° +260°
rotary shaft energized seal Rotary seal code 119
cantilever U spring		 50 1.5m/sec Rotational -200° +260°
rotary shaft energized seal Rotary seal code 120
cantilever U spring		 50 1.5m/sec Rotational -200° +260°
Rotary seal code 116
Low temperature		 50 0.5m/sec Rotational -200° +260°
rotary shaft energized seal Rotary seal code 117
Sharp dynamic lip
Low temperature		 50 0.5m/sec Rotational -200° +260°
SPECIAL PROFILES
energized seals

The technical-application data specified in catalogues, documentation and on this website are the result of more than forty years of experience and laboratory tests. The seal types suggested are the result of laboratory tests and thousands of field tests; however, the working conditions foreseen may not coincide with those of new applications and so lead to unexpected results. Therefore, HD Slipper Srl shall not be held responsible for the failure of sealing components that have not been tested under the actual working conditions. For new applications and the consequent manufacturing of specific seals, the user must conduct tests under the actual working conditions in order to approve the validity of the chosen solution. HD Slipper Srl guarantees the repeatability of the characteristics of seals tested and approved, except for subsequent modifications of applications and/or equipment and/or its components and/or processes, by the customer or a third part.